Container Reach Stacker

Main Technical Data

No.	Item		Unit	Parameter	Tolerance
1	Length		mm	11340	±2%
2	Width	Spreader	mm	6053	±2%
3	Width	Front wheel	mm	4200	±2%
4	Height		mm	4670	±2%
5	Wheelbase		mm	6000	±1%
6	Trace	Front	mm	3033	±1%
7	Trace	Rear	mm	2790	±1%
8	Overhang	Front	mm	840	±1%
9	Overhang	Rear	mm	1194	±1%
10	Min. ground clearance		mm	350	±1%
11	Min. turning radius		mm	8000	≤102%
12	Max. drawbar pull		kN	380	≥90%
13	Max grade ability		%	33%	≥90%
14	Dead weight		kg	71200	±3%
15	Rated lifting capacity		kg	45000	——
16	Stacking capacity		——	5-5-4	——
17	Max. lifting height		mm	15100	±1.5%
18	Max. lifting speed	Unloaded	mm/s	425	±10%
19	Max. lifting speed	Rated load	mm/s	250	±10%
20	Max. lowering speed	Unloaded	mm/s	360	±10%
21	Max. lowering speed	Rated load	mm/s	300	±10%
22	Max. traveling speed	Unloaded	km/h	25	±10%
23	Max. traveling speed	Rated load	km/h	21	±10%
24	Aisle width	20’	mm	11300	±2%
25	Aisle width	40’	mm	13600	±2%

Standard equipment
Spreader	XCMG spreader is suitable for handling 20′ and 40′ standard containers. Telescoping, side shift and rotating function, as well as twist lock control are available. Rated lifting capacity: 45 t. Side shift: ±800 mm. Rotation angle: -105°～+195°.
Cab	Dynamic moving full-view driver’s cab. Equipped with ergonomic seat, two point retractable seat belt, water cup holder, 12V and 24V power supply, radio, loudspeaker amplifiers and HD Reverse view system.
Air condition	High-power, fully automatic heating and cooling air condition.
Engine	TAD1151VE, in line, six-cylinder, water- cooled, turbocharged, electric control diesel engine, manufactured by Sweden Volvo; Rated power 265 kW/2100rpm, max. torque 1785 Nm / 1260 rpm; Emission compliance: compliant with off- road U.S. EPA Tier 3/EU Stage IIIA;
Transmission	15.5HR36432, automatic transmission (with manual shift) manufactured by America Dana, with 4 forward and 4 reverse gears available.
Drive axle	D102PL341 heavy duty drive axle, manufactured by German Kessler.
Tires	6 diagonal tires, Tire specifications: 18.00- 25 40PR.
Brakes	Service brake: wet disc brake, acting on the front wheels, and equipped with independent cooling tank, high performance filter and radiator. Parking disc brake, acting on the front axle.
Steering	Equipped with full hydraulic power steering, and easy to use.

Hydraulic system	America Parker variable plunger pump and values, the system has compound action, high and low speed automatic switching(high speed when unloaded, low spend when loaded.), vertical lifting and spreader anti- swing function. Equipped with high performance filter and high power independent radiator.
Electric System	24V Can bus control system, two batteries, negative ground. Driving lights: three headlights, two turning signals in front of the vehicle; two turning signals ,two brake lights and two reversing lights behind the vehicle. Working lights: four working lights at the spreader locks, four working lights at the middle of the boom, four working lights behind the vehicle. Warning lights: one rotating alarm lamp at the back of the vehicle.
Safety devices	LMT, anti-tilting protection device for rear axle, 2.5m long distance astern radar, one 2kg fire extinguisher, automatic fire extinguishing system.
Frame	Frame is made of high tension steel, with anti- torsion large cross-section.
Boom	Two-stage, quadrangular telescopic boom, anti-torsion design, is made of high tension steel.
Additional equipment
Spreader	Bromma spreader is suitable for handling 20′ and 40′ standard containers. Telescoping, side shift and rotating function, as well as twist lock control are available. Rated lifting capacity: 45 t. Side shift: ±800 mm. Rotation angle: -105°～+195°.
Coolant heating device	It is used to heat engine coolant, facilitating to start engine, applicable in cold areas.

Product parts list is as mentioned above, refer to the product quotation for specific parts.